Oxygen Generator Machine MSLZY63

Specifications

1. Maximum Recommend Flow Rate: 5LPM
2. Flow Range: 0.5〜5LPM
3. Change in maximum recommended flow when back pressure of 7kPa is applied: 0.5L/min;
4. Oxygen Concentration:93%±3%
5. 5.Output Pressure : 20-70kPa

Pressure Relief Mechanism Operational at:

250kPa±25kPa (36.25psi±3.63psi)

6.Sound Level:W54dB(A).

7.Power Supply:

AC110V±10% n60Hz ± 2%orAC220V±10% Q50Hz ± 2%

(Please refer to the specific name plate on the machine)

8 .Input Power: W400VA

9. Net Weight: 15.5kg
10. Dimension:345(L) X 280(W) x 558(H)mm
11. Altitude: Up to 1828 meters (6000 ft) above sea level without degradation of concentration levels. From 1828 meters (6000 ft) to 4000 meters (13129 ft) below 90% efficiency.

12.Safety System:

Over Current or Connection Loosen: Unit Shut Down

Compressor Over Hot: Unit Shut Down

Pressure, Cycle Failure: Alarming and Shut Down •Compressor Failure: Alarming and Shut Down •Low Oxygen Concentration

13. Minimum Operating Time: 30minutes
14. Electric classification: class II equipment, type B applied part
15. Work system: work continuously.
16. Normal Operating Condition: •Temperature range: 5°C〜40°C •Relative humidity: 30%~80%
17. •Atmosphere pressure: 860hPa〜1060hPa (12.47psi〜15.37psi)

    △ CAUTION: When storage/transportation condition is lower than 5°C, please put the device in normal operating condition more than 4 hours before operating.

    17.Oxygen Output Temperature: W 46°C

    18.Cannula length DO NOT more than 15.2m (50ft) and no twist.

    19.Storage and Transportation Condition: •Temperature range: -20°C~+55°C

    •Relative humidity: W95%

    .Atmosphere pressure:500hPa~1060hPa (10.15psi~15.37psi) CAUTION: The device should be stored with no strong sunlight, no corrosive gas and wed ventilated indoor area. The device must be transported and used in the vertical position only.