Specifications
1.Anti-electric-shock type Class I equipment
2.Category AP/APG equipment: Not category AP/APG equipment
3.Emergency care equipment: Not emergency care equipment
4.Mode of operation continuous
5.Recorder: Thermal dot-matrix recorder
6.Printing Density :8 dots per mm / 200 dots per inch (amplitude axes) 40 dots per mm / 1000 dots per inch (time axes, @ 25 mm/s)
7.Recorder Paper: Folded thermal paper: 210 mm×295 mm ×100 pages, 215 mm×280mm×100 pages (optional)
8.Leads: 9/12/15/18 Leads
9.Gain :2.5mm/mV、5mm/mV、10mm/mV 20mm/mV,10/5mm/mV,AGC±5%
10.Speed :5 mm/s、6.25 mm/s、10 mm/s、12.5
mm/s、25mm/s、50mm/s(±3%)
11.Sampling Frequency: 16KHZ
12.A/D Resolution: 24bits
13.Anti-electric-shock degree: CF type with defibrillation-proof
14.HR Range: 30~300BPM
15.Accuracy :1BPM
16.Time Constant: ≥3.2s
17.Input Circuit Current: ≤0.01μA
18.Input Voltage Range ≤±5mVp-p
19.Calibration Voltage: 1mV±2%
20.DC Offset Voltage: ±600mV
21.Input Impedance: ≥50MΩ(10HZ) CMRR ≥120dB
22.Frequency Response: (0.01~300Hz)
23.Noise: ≤12.5μV(P-P)
24.AC Filter: 50Hz/60Hz/Off
25.DFT Filter :0.01HZ/0.05HZ/0.32Hz/0.67Hz
26.Defibrillation-proof recovery time :≤5s
27.EMG Filter/Lowpass :25Hz/35Hz/45Hz/75Hz/
100Hz/150Hz/270Hz/300Hz
28.Pacemaker Detection
Amplitude:±750uV~±700mV
Width:50us~2.0ms
Sampling Frequency:16000HZ
29.Patient Leakage Current: NC:≤10uA(AC)/ ≤10uA(DC)
30.SFC:≤50uA(AC)/ ≤50uA(DC)
31.Patient Auxiliary Current: NC:≤10uA(AC)/ ≤10uA(DC)
SFC:≤50uA(AC)/ ≤50uA(DC)
Reviews
There are no reviews yet.